Plastic cable hooks are still widely used in the mining industry, but people who are not familiar with this product may not know its usage process. If you want to know the usage process, hurry up and lock in the exciting content below!

1,Choose hook size

Because the cable models and outer diameters are different, we need to choose the appropriate plastic cable hook according to the cable thickness. We need to make a hanging unit every 1.5 meters or so. You can hang one within this range as needed. Or multiple cable hooks.

2,Hook fixed

When performing hanging operations, bolt window holes should be used to fix the hooks on the wall or well wall. When fixed, the hooks should fall vertically. If multiple cables are required for hanging, a set of hooks must be used. To perform 22-in-series suspension operation, the operator first connects the cable hooks in 2-in-2 series on the ground and then fixes them.

3,Hooks in series

After connecting two plastic cable hooks in series, you should first insert the hanging rod of one hook into the hanging hole of the other hook. The straight rod sections of the two hooks should form a 90-degree right angle, and then tighten the hanging rod firmly. Press it completely into the hanging hole, and then rotate the arc-shaped hook so that the straight rod section of the hook reaches 180 degrees Celsius, and the safety buckle of one hook is just embedded in the groove of the other hook.

4,Completion confirmation

After all the operating cables are completely placed into the curved hooks, the construction workers can loosen the cables and complete the installation of the plastic cable hooks.

The above 4 points are about the use process of plastic cable hooks. I hope the above content can solve your doubts. For more information, you can pay attention to Anhui Hengzheng Packaging Technology Co., Ltd.!